100 Holes Manual Capsule Filler For Capsule Size 000# 00# 0# 1# 2# 3# 4# 5#

Base Plate (Bed Plate / Turret): The core component. It is a robust, precision-machined metal (often aluminum or stainless steel) or high-quality plastic plate with 100 perfectly aligned holes. These holes hold the capsule bodies.

Cap Plate (Top Plate): A second plate, also with 100 holes, designed to hold the capsule caps. It aligns directly over the base plate.

Powder Tray / Hopper: A shallow tray or a small hopper that holds the bulk powder to be filled. It has a rectangular opening that allows powder to access the turret.

Tamper Plate / Powder Packer: A flat plate with 100 blunt pins that exactly match the holes in the turret. It is used to compress the powder into the capsules to ensure a consistent and accurate fill weight.

Spreader Bar / Scraper: A metal or plastic bar used to sweep across the powder tray, pushing excess powder off the top of the turret and ensuring all holes are filled level.

Pin Plate (Capping Plate): A plate with 100 precise pins used to lift the filled capsule bodies and join them with their corresponding caps held in the cap plate.

Springs, Knobs, and Lever: Mechanisms for applying pressure during the tamping process and for operating the pin plate to join the capsules.

Capsule Separator (not on all models): A device used to pre-sort the empty capsules, orienting them so all bodies are in one plate and all caps are in another. This can be a separate vibrating unit or a simple manual sorting tray.