Skip to content 
English 
Russian 
Turkish 
Spanish 
French 
German 
Japanese 
DPP 140/150 Blister Packing Machine
The DPP-150 is a mid-range automatic blister packaging machine designed for the pharmaceutical, food, and medical device industries. It is suitable for packaging a variety of products such as tablets, capsules, and hard candies. Equipped with dual servo drives and HMI control, it is designed for continuous production and meets FDA cleanroom standards.
Need a Custom Quote?
Or More information About this product? Contact our sales stuff today!
Key Features
Technical Data
Machine Details
FAQ
Application
1. Simple Structure: The transmission system is improved from the original, allowing a wider working range, more precise movement, and quieter operation.
2. Compact Size: Takes up little space and is easy to transport and install.
3. Automatic Feeding and Edge Punching: Ensures stable and synchronized operation across multiple workstations over long distances.
4 Customizable Options: Includes features like color mark alignment with servo control, an embossing mechanism, secondary forming, and waste collection.
| Model: | DPP-150 |
| Blanking: | 20～50 times/min |
| Production Capacity: | 1200-4200 plates/h |
| Max. Shaping Dia. And Depth: | 130*100*15mm Max. Depth 26mm（custom-made） |
| Standard Travel Range: | 40～110mm |
| Standard Plate: | 80*57mm |
| Power of Main Motor: | 1.5kW |
| Total Power: | 3.78kW |
| Power: | 380V/220V/50Hz |
| Vacuum: | 0.4MPa-0.6MPa |
| Noise: | <75dBA |
| Thickness and Width of PVC: | 140×0.25～0. 5mm |
| Thickness and Width of PTP: | 140×0.02～0.03mm |
| Dialyzing Paper: | 50～100g*150mm |
| Mold Cooling: | Runing water or circulating water |
| Weight: | Net weight 1500 kg ; |
| Overall Size of Machine: | 2510×750×1450 mm |
The speed can vary based on product size and blister format, but it typically operates in the range of 80 to 150 blisters per minute.
The DPP-150 has a maximum blister forming area, often around 150mm x 150mm (hence the model number), but this can vary. Always check the specific technical drawing for your machine's configuration.
It is designed for:
Forming Web: PVC, PVDC, COC, Aclar, and other thermoformable films.
Lidding Material: Aluminum foil (hard temper), Paper/Poly/foil laminates, and other heat-sealable lidding.
The standard DPP-150 is designed for thermoforming. A cold-forming version (often denoted as a different model, like DPP-150C) is required for aluminum/aluminum blister packs used for highly moisture or oxygen-sensitive drugs.
With trained personnel and proper preparation, a full format changeover (changing forming mold, sealing die, punch, etc.) can take 30 to 60 minutes. Using quick-change systems can significantly reduce this time.
Here are a few common issues and their likely causes:
Poor Blister Forming: Incorrect heating temperature, faulty forming membrane, or insufficient compressed air pressure.
Weak or Uneven Seal: Dirty sealing die, incorrect temperature setting, or uneven pressure.
Product Crushing: Misaligned feeding system or incorrect product depth in the forming mold.
Film Webbing/Jamming: Misaligned guide rails, incorrect unwind brake tension, or worn rollers.
Machine Stops Unexpectedly: Often due to a safety interlock (door open), film breakage, or a missing "no product" signal from the feeder.
You will typically need:
Electrical: 3-Phase power supply (e.g., 415V/50Hz or 480V/60Hz).
Compressed Air: Clean, dry air at a specific pressure and flow rate (e.g., 6-8 bar, >0.3 m³/min).
Space: Adequate floor space for the machine and material unwind stands.
